Optimization of process parameters in LPG treatment unit

سال انتشار: 1389
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,835

فایل این مقاله در 8 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

IOGPC17_149

تاریخ نمایه سازی: 3 آبان 1389

چکیده مقاله:

This paper includes the significant lab & on-site experience of authors related to optimizing process parameters of LPG treatment unit and its benefits in phases 2&3 of south pars gas complex . The LPG treatment unit was designed as a closed circuit system with the primary objective removing mercaptanes and othe sulphuric compounds such as COS,CS2&... from liquefied hydrocarbons. because of LPG treatment plant problems and limitation in catalyst providing due to sanctions , it was decided to optimize operating parameters in order to improve reliability of plant and as far as possible reduce catalyst injection to the unit. an investigation was started by process engineering team in close coordination with laboratory. in first step some non routine tests were defined for laboratory team to perform during the test such as mercaptide content of lean caustic, mercaptan and total sulphur content of treated LPG.

نویسندگان

hamed foroughipour

process engineering deparment south pars gas complex

akbar ehsaninejad

process engineering deparment south pars gas complex

saeed sheikhaei

process engineering deparment south pars gas complex

nasibeh hajilery

process engineering deparment south pars gas complex

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • Project / engineering documents (available in phases 2&3 document center) ...
  • DB 5561V 999 P332 204 Basic Engineering Design Data for ...
  • DB 5561V 999 P312 205 Process Design Criteria ...
  • DB 5561V 114 P312 001 Design Basis for Unit 114 ...
  • DB 5561V 114 P312 201 Process Design Basis for Unit ...
  • DB 5561V 999 P312 210 Drainage Philosophy ...
  • نمایش کامل مراجع