An investigation of tensile strength of Ti6Al4V titanium screw inside femur bone using finite element and experimental tests

سال انتشار: 1399
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 347

فایل این مقاله در 7 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

JR_JCAM-51-1_010

تاریخ نمایه سازی: 31 تیر 1399

چکیده مقاله:

The geometric optimization of orthopedic screws can considerably increase their orthopedic efficiency. Due to the high geometric parameters of orthopedic screws, a finite element simulation is an effective tool for analyzing and forecasting the effect of the parameters on the load-bearing capacity of different types of screws and bones. Thus, in the present study, the tensile strength of a typical cortical titanium screw was investigated by the finite element method, and experimental tests confirmed the obtained results. The behavior of the screw in the tensile test was discussed in terms of stress, force, and displacement. The maximum force results show a 14% difference between simulation and experimental works in tensile type loading. Moreover, it was suggested that the trend of force curves in both the experimental test and numerical simulation shows high similarity, and FEM predicts the process with acceptable accuracy. Furthermore, it was concluded that the stress values are higher while moving toward the top surface of the bone.

کلیدواژه ها:

نویسندگان

Peyman Mashhadi Keshtiban

Faculty of Mechanical Engineering,Urmia University of Technology, Urmia, Iran

Milad Regbat

Faculty of Mechanical Engineering,Urmia University of Technology, Urmia, Iran

Mohsen Mashhadi Keshtiban

Department of Mechanical Engineering, Tarbiat Modares University, Tehran, Iran

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • J.-D. Kim, N.-S. Kim, C.-S. Hong, C.-Y. Oh, Design optimization ...
  • S.-M. Hou, C.-C. Hsu, J.-L. Wang, C.-K. Chao, J. Lin, ...
  • C.-K. Chao, C.-C. Hsu, J.-L. Wang, J. Lin, Increasing bending ...
  • K. Haase, G. Rouhi, Prediction of stress shielding around an ...
  • T. Wu, H. Fan, R. Ma, H. Chen, Z. Li, ...
  • H. Ketata, F. Affes, M. Kharrat, M. Dammak, A comparative ...
  • J. R. Mau, K. M. Hawkins, S. L.-Y. Woo, K. ...
  • Y. Naidubabu, V. Kondaiah, R. Dumpala, B. R. Sunil, Assessing ...
  • L. Yan, J. L. Lim, J. W. Lee, C. S. ...
  • J. Li, Z. Zhao, P. Yin, L. Zhang, P. Tang, ...
  • E. Tetteh, M. B. McCullough, Impact of screw thread shape ...
  • N. Zain, R. Daud, N. Aziz, K. Ahmad, A. Ismail, ...
  • K. Alam, A. Mitrofanov, V. V. Silberschmidt, Experimental investigations of ...
  • S. Eberle, C. Gerber, G. Von Oldenburg, S. Hungerer, P. ...
  • نمایش کامل مراجع