In-Plane and out of Plane Free Vibration of U-Shaped AFM Probes Based on the Nonlocal Elasticity
محل انتشار: فصلنامه مکانیک جامد، دوره: 10، شماره: 2
سال انتشار: 1397
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 362
فایل این مقاله در 15 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_JSMA-10-2_005
تاریخ نمایه سازی: 12 اسفند 1398
چکیده مقاله:
Atomic force microscope (AFM) has been developed at first for topography imaging; in addition, it is used for characterization of mechanical properties. Most researches have been primarily focused on rectangular single-beam probes to make vibration models simple. Recently, the U-shaped AFM probe is employed to determine sample elastic properties and has been developed to heat samples locally. In this study, a simplified analytical model of these U-shaped AFM is described and three beams have been used for modelling this probe. This model contains two beams are clamped at one end and connected with a perpendicular cross beam at the other end. The beams are supposed only in bending flexure and twisting, but their coupling allows a wide variety of possible dynamic behaviors. In the present research, the natural frequency and sensitivity of flexural and torsional vibration for AFM probes have been analyzed considering influence of scale effect. For this purpose, governing equations of dynamic behavior of U-shaped AFM probe are extracted based on Eringen s theory using Euler–Bernoulli beam theory and an analytical method is employed to solve these equations. The results in this paper have been extracted for different values of nonlocal parameters; it is shown that for a special case, there is a good agreement between reported results in available references and our results. The obtained results show that the frequencies of U-shaped AFM decrease with increasing the nonlocal parameter.
کلیدواژه ها:
نویسندگان
M Ghadiri
Faculty of Engineering, Department of Mechanics, Imam Khomeini International University, Qazvin, Iran
S.A.H Hosseini
Department of Mechanics, Zanjan University, Zanjan, Iran
M Karami
Faculty of Engineering, Department of Mechanics, Imam Khomeini International University, Qazvin, Iran
M Namvar
Faculty of Engineering, Department of Mechanics, Imam Khomeini International University, Qazvin, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :