An Enhanced Viscoplastic Constitutive Model for Semi-Solid Materials to Analyze Shear Localization

سال انتشار: 1397
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 373

فایل این مقاله در 8 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

JR_JSMA-10-4_014

تاریخ نمایه سازی: 12 اسفند 1398

چکیده مقاله:

Semi-solid materials undergo strain localization and shear band formation as a result of granular nature of semi-solid deformation. In the present study, to analyze the shear localization, a unified viscoplastic constitutive model was developed for the homogeneous flow. Then, a linearized analysis of the stability performed by examining the necessary condition for the perturbation growth. For this purpose, a shear layer model was considered to analyze the perturbation growth and subsequent instability. The perturbation analysis revealed that the failure mode in semi-solid materials is diffused with long wave length regime, rather than to be localized and exhibiting short wave length regime. Moreover, decreasing the solid skeleton has a retarding effect on the perturbation growth and localization at low and modest strain rates. The performed analysis showed that the localization analysis results in a new interpretation for the micro-mechanisms of the semi-solid deformation. The constitutive model was fairly well correlated with the experimental results.                                

نویسندگان

M.H Sheikh-Ansari

Faculty of Materials Science and Engineering, K.N. Toosi University of Technology, Tehran, Iran

M Aghaie-Khafri

Faculty of Materials Science and Engineering, K.N. Toosi University of Technology, Tehran, Iran

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • Kang C.G., Choi J.S., Kim K.H., 1999, The effect of ...
  • Atkinson H.V., 2005, Modelling the semisolid processing of metallic alloys, ...
  • Koeune R., Ponthot J.P., 2008, A one-phase thermomechanical constitutive model ...
  • Bayoumi M.A., Negm M.I., El-Gohry A.M., 2009, Microstructure and mechanical ...
  • Favier V., Atkinson H.V., 2011, Micromechanical modelling of the elastic–viscoplastic ...
  • Gourlay C.M., Dahle A.K., 2007, Dilatant shear bands in solidifying ...
  • Gourlay C.M., Dahle A.K., Nagira T., Nakatsuka N., Nogita K., ...
  • Fonseca J., O’Sullivan C., Nagira T., Yasuda H., Gourlay C.M., ...
  • Kareh K.M., O’Sullivan C., Nagira T., Yasuda H., Gourlay C.M., ...
  • Meylan B., Terzi S., Gourlay C.M., Suéry M., Dahle A.K., ...
  • Montassar S., Buhan P., 2006, Some general results on the ...
  • Hu X.G., Zhu Q., Atkinson H.V., Lu H.X., Zhang F., ...
  • Rudnicki J.W., Rice J.R.,1975, Conditions for the localization of deformation ...
  • Vardoulakis I., 1977, Sensitivity analysis of the shear band bifurcation ...
  • Bai Y.L., 1982, Thermo-plastic instability in simple shear, Journal of ...
  • Anand L., 1987, Onset of shear localization in viscoplastic solids, ...
  • Desoyer T., Hanus J.L., Keryvin V., 1998, An instability condition ...
  • Aghaie-Khafri M., Mahmudi R., 2005, The effect of preheating on ...
  • Aghaie-Khafri M., Mahmudi R., 2005, Optimizing homogenization parameters for better ...
  • Sheikh-Ansari M.H., Aghaie-Khafri M., 2017, Predicting flow localization in semi-solid ...
  • Terzaghi K.V., 1936, The shearing resistance of saturated soils, Proc ...
  • Nguyen T.G., Favier D., Suery M., 1994, Theoretical and experimental ...
  • Martin C.L., Brown S.B., Favier D., Suéry M., 1995, Shear ...
  • نمایش کامل مراجع