Optimal Process Design of Shrinkage and Welding line Strength in Injection Molding by Taguchi Method
محل انتشار: یازدهمین کنفرانس ملی مهندسی ساخت و تولید ایران
سال انتشار: 1389
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,896
فایل این مقاله در 9 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ICME11_354
تاریخ نمایه سازی: 3 مرداد 1389
چکیده مقاله:
This paper uses the Taguchi method for the optimization of thermoplastic injection molding parameters. This method is useful for studying the interactions between the parameters, and it is also a powerful design of experiments tool, which provides a simple, efficient and systematic approach to determine optimal process parameters. This study specifies eight principal machining parameters namely the mold opening time, mold temperature, melt temperature, filling time, filling pressure, packing time, packing pressure and cooling time. The experimental results were used to obtain the optimum combination of process parameter to give minimum shrinkage and maximum welding line strength.
کلیدواژه ها:
Plastic injection- Optimization- Taguchi method
نویسندگان
M. Alialmoussavi
MSc. graduated, Faculty of Mechanical Engineering,
T. Azdast
Assistant Professor, Faculty of Mechanical Engineering, Urmia University
A. Doniavi
Assistant Professor, Faculty of Mechanical Engineering, Urmia University
A Seyfi
MSc. Student, Faculty of Mechanical Engineering, Urmia University
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :