Pressure Loss of Turbulence Swirling Flow in Convergent Nozzles
محل انتشار: هجدهمین کنفرانس سالانه مهندسی مکانیک
سال انتشار: 1389
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,269
فایل این مقاله در 6 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ISME18_465
تاریخ نمایه سازی: 1 تیر 1389
چکیده مقاله:
In this work, pressure loss is simulated analytically in a convergent nozzle. The inlet vector velocity has two components in axial and tangential directions. The governing equations of the turbulence flow are solved by integration method to obtain pressure loss along the nozzle wall.The results show that the boundary layer thickness depends only on the nozzle angles, Reynolds number and Roseby number. It is also found that pressure distribution decreases drastically near the outlet of the nozzle about 100 percent in average in different conditions. The maximum value of the boundary layer thickness is about three times of the outlet thickness.
کلیدواژه ها:
نویسندگان
A. N. Broujerdi
The Professor of Sharif University of Technology
A. Kebriaee
PHD Candidate of Sharif University of Technology
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :