Plastic wastes separation practice and disposal mechanism by households, hospitals, markets and waste management body

سال انتشار: 1398
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 284

فایل این مقاله در 16 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

JR_IJHCUM-4-3_004

تاریخ نمایه سازی: 17 مهر 1398

چکیده مقاله:

This study was carried out to reveal the plastic wastes separation practice and disposal mechanism as well as awareness of the negative impact of plastic wastes on the environment, in Makurdi area of Benue State, Nigeria. Questionnaires were administered to 468 individual respondents in 6 sub-locations of the city. Inquisition was also made from 10 hospitals, 6 market centers and the waste management body. The results revealed that 81.2% of the respondents do not separate plastic wastes from other waste stream. All the hospitals and markets do not sort at all. The government agency responsible for the final management of the waste stream does not have a practice of sorting plastic wastes from the whole waste collected with a view to achieving material and energy recovery. The most adopted methods of disposal for plastic wastes by all the stakeholders considered are dumping/burning and dumping.  50.4% of the respondents adopted dumping/burning as a disposal method for plastic wastes while 19.2% burn theirs. Although almost 50% of the population examined for the study claimed to be aware of the dangers of plastic wastes, there is still indifference in the way these wastes are handled as can be observed by the indiscriminate dumping of these wastes, creating litters around the environment. These result revealed a need for the development of a proactive and sustainable management system involving individuals, businesses, hospital managements and waste management body that will protect the environment and enhance resource and energy recovery from plastic wastes.

کلیدواژه ها:

نویسندگان

O.F. Olusunmade

Department of Mechanical Engineering, College of Engineering, Federal University of Agriculture, Makurdi, Nigeria

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • Al-Salem, S.M.; Lettieri, P.; Baeyens, J., (2010). The valorization of ...
  • ACC, (2005). How plastics are made. American Chemistry Council. ...
  • Anke, B.; Raf, D.; Jan B.; Rui, Z., (2013). Gasification ...
  • Bakare, W., (2016). Solid Waste Management in Nigeria. BioEnergy Consult. ...
  • Berkum, M.; Aras, E.; Nemlioglu, S., (2005). Disposal of solid ...
  • Gorman, B., (2017). Plastic Waste: Environmental Effects of Plastic Pollution. ...
  • Capel, C., (2008). Waste sorting- A look at the separation ...
  • CNY, (2014). PlaNYC Progress Report 2014.City of New York. ...
  • Cohen, S.; Martinez, H.; Schroder, A., (2015). Waste management practices ...
  • DSCNY, (2006).Final Comprehensive Solid Waste Management Plan.Department of Sanitation, City ...
  • Elias, H.G., (2000). Plastics, general survey, Ullman’s encyclopedia of industrial ...
  • EPD, (2012). Waste Reduction and Recovery Factsheet No.1: recovery and ...
  • Gregory, M.R., (2009). Environmental implications of plastic debris in marine ...
  • Gwada, B.; Ogendi, G.; Makindi, S.M.; Trott, S., (2019). Composition ...
  • Jambeck, J.R.; Geyer, R.; Wilcox, C.; Siegler, T. R.; Perryman, ...
  • Lopez, G.; Artetxe, M.; Amutio, M.; Alvarez, J.; Bilbao, J.; ...
  • Malkow, T., (2004). Novel and innovative pyrolysis and gasification technologies ...
  • Meeker, J.D.; Sathyanarayana, S.; Swan, S.H., (2009). Phthalates and other ...
  • MLS, (2018). The Declaration of the Global Plastics Association for ...
  • Moore, C.J., (2008). Synthetic polymers in the marine environment: a ...
  • Olusunmade, O.F.; Bulus, A. E.; Kashin, T. K., (2018). Effect ...
  • Olusunmade, O.F.; Zechariah, S.; Yusuf, T.A., (2018). Characterization of Recycled ...
  • Plasticisrubbish, (2013). Naphtha and Oil derived plastics.               ...
  • PlasticsEurope, (2013). Zero Plastics to landfill: Waste collection, pre-treatment and ...
  • PlasticsEurope, (2018). How plastics are made. ...
  • Kunwar, B; Cheng, H.N.; Sriram, R. C.; Brajendra K. S., ...
  • Thompson, R.C.; Moore,C.J.; VomSaal, F.S.; Shanna, H.S., (2009). Plastics, the ...
  • UNEP, (2018). UN Declares War on Ocean Plastic.United Nations Environment ...
  • Koushal,V.;Sharma,R.; Sharma,M.; Sharma, R.; Sharma, V., (2014). Plastics: Issues challenges ...
  • Wong, S.L.; Ngadi, N.; Abdullah, T.A.T.; Inuwa I.M., (2015). Current ...
  • Zhou, C.; Fang, W.; Xu. W.; Cao, A.; Wang, R., ...
  • Al-Salem, S.M.; Lettieri, P.; Baeyens, J., (2010). The valorization of ...
  • ACC, (2005). How plastics are made. American Chemistry Council. ...
  • Anke, B.; Raf, D.; Jan B.; Rui, Z., (2013). Gasification ...
  • Bakare, W., (2016). Solid Waste Management in Nigeria. BioEnergy Consult. ...
  • Berkum, M.; Aras, E.; Nemlioglu, S., (2005). Disposal of solid ...
  • Gorman, B., (2017). Plastic Waste: Environmental Effects of Plastic Pollution. ...
  • Capel, C., (2008). Waste sorting- A look at the separation ...
  • CNY, (2014). PlaNYC Progress Report 2014.City of New York. ...
  • Cohen, S.; Martinez, H.; Schroder, A., (2015). Waste management practices ...
  • DSCNY, (2006).Final Comprehensive Solid Waste Management Plan.Department of Sanitation, City ...
  • Elias, H.G., (2000). Plastics, general survey, Ullman’s encyclopedia of industrial ...
  • EPD, (2012). Waste Reduction and Recovery Factsheet No.1: recovery and ...
  • Gregory, M.R., (2009). Environmental implications of plastic debris in marine ...
  • Gwada, B.; Ogendi, G.; Makindi, S.M.; Trott, S., (2019). Composition ...
  • Jambeck, J.R.; Geyer, R.; Wilcox, C.; Siegler, T. R.; Perryman, ...
  • Lopez, G.; Artetxe, M.; Amutio, M.; Alvarez, J.; Bilbao, J.; ...
  • Malkow, T., (2004). Novel and innovative pyrolysis and gasification technologies ...
  • Meeker, J.D.; Sathyanarayana, S.; Swan, S.H., (2009). Phthalates and other ...
  • MLS, (2018). The Declaration of the Global Plastics Association for ...
  • Moore, C.J., (2008). Synthetic polymers in the marine environment: a ...
  • Olusunmade, O.F.; Bulus, A. E.; Kashin, T. K., (2018). Effect ...
  • Olusunmade, O.F.; Zechariah, S.; Yusuf, T.A., (2018). Characterization of Recycled ...
  • Plasticisrubbish, (2013). Naphtha and Oil derived plastics.               ...
  • PlasticsEurope, (2013). Zero Plastics to landfill: Waste collection, pre-treatment and ...
  • PlasticsEurope, (2018). How plastics are made. ...
  • Kunwar, B; Cheng, H.N.; Sriram, R. C.; Brajendra K. S., ...
  • Thompson, R.C.; Moore,C.J.; VomSaal, F.S.; Shanna, H.S., (2009). Plastics, the ...
  • UNEP, (2018). UN Declares War on Ocean Plastic.United Nations Environment ...
  • Koushal,V.;Sharma,R.; Sharma,M.; Sharma, R.; Sharma, V., (2014). Plastics: Issues challenges ...
  • Wong, S.L.; Ngadi, N.; Abdullah, T.A.T.; Inuwa I.M., (2015). Current ...
  • Zhou, C.; Fang, W.; Xu. W.; Cao, A.; Wang, R., ...
  • Al-Salem, S.M.; Lettieri, P.; Baeyens, J., (2010). The valorization of ...
  • ACC, (2005). How plastics are made. American Chemistry Council. ...
  • Anke, B.; Raf, D.; Jan B.; Rui, Z., (2013). Gasification ...
  • Bakare, W., (2016). Solid Waste Management in Nigeria. BioEnergy Consult. ...
  • Berkum, M.; Aras, E.; Nemlioglu, S., (2005). Disposal of solid ...
  • Gorman, B., (2017). Plastic Waste: Environmental Effects of Plastic Pollution. ...
  • Capel, C., (2008). Waste sorting- A look at the separation ...
  • CNY, (2014). PlaNYC Progress Report 2014.City of New York. ...
  • Cohen, S.; Martinez, H.; Schroder, A., (2015). Waste management practices ...
  • DSCNY, (2006).Final Comprehensive Solid Waste Management Plan.Department of Sanitation, City ...
  • Elias, H.G., (2000). Plastics, general survey, Ullman’s encyclopedia of industrial ...
  • EPD, (2012). Waste Reduction and Recovery Factsheet No.1: recovery and ...
  • Gregory, M.R., (2009). Environmental implications of plastic debris in marine ...
  • Gwada, B.; Ogendi, G.; Makindi, S.M.; Trott, S., (2019). Composition ...
  • Jambeck, J.R.; Geyer, R.; Wilcox, C.; Siegler, T. R.; Perryman, ...
  • Lopez, G.; Artetxe, M.; Amutio, M.; Alvarez, J.; Bilbao, J.; ...
  • Malkow, T., (2004). Novel and innovative pyrolysis and gasification technologies ...
  • Meeker, J.D.; Sathyanarayana, S.; Swan, S.H., (2009). Phthalates and other ...
  • MLS, (2018). The Declaration of the Global Plastics Association for ...
  • Moore, C.J., (2008). Synthetic polymers in the marine environment: a ...
  • Olusunmade, O.F.; Bulus, A. E.; Kashin, T. K., (2018). Effect ...
  • Olusunmade, O.F.; Zechariah, S.; Yusuf, T.A., (2018). Characterization of Recycled ...
  • Plasticisrubbish, (2013). Naphtha and Oil derived plastics.               ...
  • PlasticsEurope, (2013). Zero Plastics to landfill: Waste collection, pre-treatment and ...
  • PlasticsEurope, (2018). How plastics are made. ...
  • Kunwar, B; Cheng, H.N.; Sriram, R. C.; Brajendra K. S., ...
  • Thompson, R.C.; Moore,C.J.; VomSaal, F.S.; Shanna, H.S., (2009). Plastics, the ...
  • UNEP, (2018). UN Declares War on Ocean Plastic.United Nations Environment ...
  • Koushal,V.;Sharma,R.; Sharma,M.; Sharma, R.; Sharma, V., (2014). Plastics: Issues challenges ...
  • Wong, S.L.; Ngadi, N.; Abdullah, T.A.T.; Inuwa I.M., (2015). Current ...
  • Zhou, C.; Fang, W.; Xu. W.; Cao, A.; Wang, R., ...
  • HOW TO CITE THIS ARTICLE: ...
  • Olusunmade, O.F., (2019). Plastic wastes separation practice and disposal mechanism by ...
  • نمایش کامل مراجع