Conical Conformal Antenna Design using the CPM Method for MIMO Systems

سال انتشار: 1398
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 572

فایل این مقاله در 13 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

JR_JCESH-8-1_004

تاریخ نمایه سازی: 15 مهر 1398

چکیده مقاله:

Abstract- In this article, the design of conformal antennas has been discussed using the characteristic modes (CM) method. For this purpose, the vector wave function(VWF) has been utilized to achieve a two-dimensional mapping of the conformal antenna. In designing and analyzing of cone-shaped antennas applicable for multi-input multi-output (MIMO) systems, the most important goal is to achieve a structure with the least correlation coefficient. In order to achieve this goal in these types of antennas, first an appropriate two-dimensional mapping has been selected using the vector wave functions and then its orthogonal characteristic modes have been obtained by the CPM method. In this way, a 4-port conical antenna, whose analysis had many computational problems, was designed; the results obtained from the simulation and the prototype as well as the measurement of this antenna also confirmed the low correlation coefficient (< 0.001), the gain of about 4.2 dB in a frequency of 5.5 GHz, and SWR < 1.22 in the frequency range of 4.6 to 6.6 GHz, indicating a broad bandwidth of around 32%.

کلیدواژه ها:

Multiple Input Multiple Output (MIMO) Systems ، Characteristic Port Modes (CPM) ، Correlation Coefficient ، Characteristic Modes methods (CMs) ، Vector Wave Functions(VWF)

نویسندگان

Payman Mohamadi Khalil Abad

Department of Electrical Engineering, Science and Research Branch, Islamic Azad University, Tehran-Iran

Gholamreza Dadashzadeh

Shahed University

Mohammad Naser-moghadasi

Faculty of Engineering, Science and Research Branch, Islamic Azad University, Tehran, Iran