Developing turbulent flows in rectangular channels: A parametric study
سال انتشار: 1393
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 383
فایل این مقاله در 6 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_ARWW-1-2_001
تاریخ نمایه سازی: 24 شهریور 1398
چکیده مقاله:
The developing turbulent flow in an open channel is a complex three-dimensional flow influenced by the secondary currents and free surface effects and is, therefore, not amenable to analytical solution. This paper aims to study the impact of three key hydraulic parameters (relative roughness, the Froude number and the Reynolds number) on the establishment length using computational fluid dynamic (CFD) analysis. CFD analysis is based on the use of the ANSYS-CFX commercial code. The CFD strategy of modelling is validated against experimental velocity distribution in a cross-section and a good agreement is achieved. A dimensionless length is suggested for predicting the length of the developing flow zone for rectangular open channel. A linear relationship has also been developed for assessing the establishment length.
کلیدواژه ها:
نویسندگان
Hossein Bonakdari
Department of Civil Engineering, Razi University, Kermanshah, Iran
Gislain Lipeme-Kouyi
Department of Civil and Environmental Engineering, University of Lyon, Villeurbanne, France
Girdhari Lal Asawa
Department of Civil Engineering, GLA University, Mathura, India