Computation of turbulent flows using a k-epsilon turbulence model
محل انتشار: چهارمین کنفرانس ملی مهندسی مکانیک و هوافضا
سال انتشار: 1398
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 485
فایل این مقاله در 9 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
MECHAERO04_072
تاریخ نمایه سازی: 24 شهریور 1398
چکیده مقاله:
The fluid flow of turbulence through the tube and the channel is important in fluid matters. It is well known that, in the framework of isotropic or eddy viscosity turbulence closure modeling, good predictions of the mean and turbulent flow fields rely on reasonable descriptions of the turbulent length scale and velocity scale inside the flow field. The inconsistency of the standard k - epsilon model is very often attributed to the dissipation rate equation which is highly empirical in nature. Improvement of the model performance is usually achieved by modifying the dissipation rate equation. In this paper, the speed and distribution of pressure along the pipe and channel are calculated and compared with each other.
کلیدواژه ها:
نویسندگان
Mohamad Mirmasoumi
Mechanical engineering graduate student, Amir Kabir University of Technology, Tehran, Iran
Farnaz Shariat Bahadori
Mechanical engineering graduate student, Amir Kabir University of Technology, Tehran, Iran
Ali Asghar Pirkhalili
Mechanical engineering graduate student, Malek Ashtar University of Technology of Technology, Isfahan, Iran
Peyman Ramezanian
Mechanical engineering graduate student, Malek Ashtar University of Technology of Technology, Isfahan, Iran