Effect of Pre-strain on Debond Initiation in Shape Memory Alloy Wire Reinforced Polymers

سال انتشار: 1397
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 426

متن کامل این مقاله منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل مقاله (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

COMPOSIT06_062

تاریخ نمایه سازی: 31 تیر 1398

چکیده مقاله:

In the present study, the effect of pre-strain on the interfacial behaviour of shape memory alloy (SMA) reinforced polymer composites is experimentally investigated. Experimental pull-out tests were performed at three different pre-strain level (0, 2 and 4%). Results showed applying the pre-strain in the SMA wire followed by a thermal activation enhanced the debonding load between the SMA wire and epoxy matrix so that the maximum debond load increased about 171% and 255% for pre-strains of 2% and 4%, respectively. Moreover, the optical microscopy was used to show the effect of the generated recovery force in the SMA/Polymer dibond initiation.

نویسندگان

H FATHI

MSc Student, Composites Research Laboratory, Center of Excellence in Experimental Solid Mechanics and Dynamics,School of Mechanical Engineering, Iran University of Science and Technology, Tehran ۱۶۸۴۶-۱۳۱۱۴, Iran

M.M Shokrieh,

Professor, Composites Research Laboratory, Center of Excellence in Experimental Solid Mechanics and Dynamics, School of Mechanical Engineering, Iran University of Science and Technology, Tehran ۱۶۸۴۶-۱۳۱۱۴, Iran

A SAEEDI

Postdoctoral fellow, Composites Research Laboratory, Center of Excellence in Experimental Solid Mechanics and Dynamics,School of Mechanical Engineering, Iran University of Science and Technology, Tehran ۱۶۸۴۶-۱۳۱۱۴, Iran