Calculation of destruction power and current and voltages of electromagnetic launcher
محل انتشار: دومین کنفرانس بین المللی فناوری های نوین در علوم
سال انتشار: 1397
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 413
فایل این مقاله در 8 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
CMTS02_099
تاریخ نمایه سازی: 29 تیر 1398
چکیده مقاله:
Results of hypervelocity impact tests at an electromagnetic launcher with plasma armature are described. The tests were performed with a thick duralumin disk of ۸۰–۱۰۰mm diameter and of ۴۰mm height impacted by a lexan cylinder of ۱.۵–۳ g mass. The projectile velocity amounted to ۴–۵.۵ km/s. The launcher operational characteristics are described. In the tests, various configurations of the target fracture were obtained including cratering and spall cracks, disks and cones. The computer simulations were accomplished by means of a ۲D axisymmetrical SPH code using interparticle contact algorithms. In these algorithms, stresses and velocity at the contact points of Lagrangian particles are computed by the linear Riemann solver. For description of material failure, a model based on a threshold stress criterion was used. The main features of material distribution and target fracture are reproduced in simulations.
کلیدواژه ها:
نویسندگان
Mohsen godarzi
Department Of Headquarters Command, Faculty Of Command And War, Aja War University Of Tehran, Iran
Ali ashraf geravand
Department Of Headquarters Command, Faculty Of Command And War, Aja War University Of Tehran, Iran
Bahram azimi serenjeke
Department Of Headquarters Command, Faculty Of Command And War, Aja War University Of Tehran, Iran
erfan cholaki
Department Of Physics, Faculty Of Science, Islamic Azad University Of Kermanshah Branch, Kermanshah, Iran