Effect of aluminum contents on the microstructure and properties of AlxCoCrFeNi alloys
محل انتشار: پنجمین کنفرانس بین المللی آلومینیوم ایران
سال انتشار: 1397
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 519
نسخه کامل این مقاله ارائه نشده است و در دسترس نمی باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
IIAC05_066
تاریخ نمایه سازی: 27 تیر 1398
چکیده مقاله:
In 2004, Yeh et al. put forward a total innovative conceptual component design. The researcher added more than 5 components with a near equimolar ratio to the alloys. And the alloys were named as high-entropy alloys (HEAs). Studies showed that simple solid solution phase usually appeared, rather than intermetallic compounds in HEAs. Those phases empowered the alloy with high hardness, excellent resistance to temper softening, good ductility and corrosion resistance. In this study, AlxCoCrFeNi alloys with multiprincipal elements (x = 0, 0.25, 0.75, 1.25 and 2) are prepared by using an induction-melting. With increasing x, the AlxCoCrFeNi alloys change from single FCC phase to single BCC phase with a transition duplex FCC/BCC region. Their microstructure and mechanical properties are investigated. This result confirms that Al promotes the formation of BCC structure. The increase of x leads to distortion of the crystalline lattice and the alloy strengthening. The highest hardness (700 HV) is achieved by x=0.75 which the structure changes from FCC to FCC+BCC.
کلیدواژه ها:
نویسندگان
Maryam Izadi
School of Metallurgy and Materials Engineering, Iran University of Science and Technology (IUST), Tehran, ۱۶۸۴۶۱۳۱۱۴, Iran
Mansour Soltanieh
School of Metallurgy and Materials Engineering, Iran University of Science and Technology (IUST), Tehran, ۱۶۸۴۶۱۳۱۱۴, Iran
Somaye Alamolhoda
School of Metallurgy and Materials Engineering, Iran University of Science and Technology (IUST), Tehran, ۱۶۸۴۶۱۳۱۱۴, Iran