Experimental and Numerical Investigation of Mechanical Properties of Thin-Walled 6063 Aluminum Parts Produced by Liquid Impact Forming
محل انتشار: پنجمین کنفرانس بین المللی آلومینیوم ایران
سال انتشار: 1397
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 359
نسخه کامل این مقاله ارائه نشده است و در دسترس نمی باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
IIAC05_061
تاریخ نمایه سازی: 27 تیر 1398
چکیده مقاله:
Quick, low-cost and high-quality manufacturing is considered a key factor in today’s industry.Therefore, researchers have turned to inventing new methods for meeting such requirements. Liquid impact forming is one such method which is being increasingly developed in different industries, such as automotive and aerospace. Considered to be a tube hydroforming process, this forming method utilizes liquid pressure to produce the desired shape. In this study, the liquid impact forming process, applied to a thin-walled tube made of 6063 aluminum alloy, was experimentally and numerically investigated. In the experimental section, a new die was designed and manufactured for deforming the cross section of the aluminum tube into a hexagonal profile. To investigate the characteristics of the hexagonal profile obtained from the forming process, tensile and three-point bend tests were performed. The results obtained from the three-point bend test indicated that the flexural strength of the circular tube was greater than that of the hexagonal profile due to its greater moment of inertia. The numerical results included plastic equivalent strain distribution, variations in the profile thickness and the force required for the forming process. Upon comparing the workpiece thicknesses obtained from numerical simulation and measurements, a good agreement was observed.
کلیدواژه ها:
نویسندگان
Seyed Davoud Nourbakhsh
School of Mechanical Engineering, Iran University of Science and Technology, Tehran, P.O. Box: ۱۶۷۶۵-۱۶۳, Iran
Kian Tafazzoli Aghvami
School of Mechanical Engineering, Iran University of Science and Technology, Tehran, P.O. Box: ۱۶۷۶۵-۱۶۳, Iran