Decrease of Modeling errors in kitting process by self-control method for the Assembly line feeding

سال انتشار: 1398
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 344

فایل این مقاله در 13 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

MIEACONF02_028

تاریخ نمایه سازی: 26 تیر 1398

چکیده مقاله:

This research was intended to reduce the cost of the kitting process errors in the parts supply system particular in the internal logistics system. For this purpose, in the target population, first with regard to the initial conditions identified errors and accumulate the requirements data then the error diagram is drawn and the error model is depicted and error modeling is done then, by changing the approach from inspection to self-control , the indicators required for self-control system have been calculated and due to the change in the approach to self-control, its requirements have been provided and typically, the error diagram is plotted with the desired value and new modeling, error calculation in this research has introduced self-control method and training for all personnel for their participation in the check-and-error process as a result, the kitting process showed an error close to zero with self-control.

کلیدواژه ها:

نویسندگان

Amir Reza Ahmadi Keshavarz

Student of Phd - Department of industrial engineering, Islamic Azad university-Parand

Davood Jaafari

Professor assistant - Department of industrial engineering, Islamic Azad university-Parand