A New Stress Based Approach for Nonlinear Finite Element Analysis
سال انتشار: 1398
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 321
فایل این مقاله در 14 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_JACM-5-3_006
تاریخ نمایه سازی: 19 تیر 1398
چکیده مقاله:
This article demonstrates a new approach for nonlinear finite element analysis. The methodology is very suitable and gives very accurate results in linear as well as in nonlinear range of the material behavior. Proposed methodology can be regarded as stress based finite element analysis as it is required to define the stress distribution within the structural body with structural idealization and modelling assumptions. The methodology eliminates the lengthy and tedious procedure of step by step and then iterative procedure adopted classically for nonlinear analysis problems. One dimensional problem of a simple bar loaded axially is solved to formulate the basic principles. Two dimensional problem of a cantilever beam bending and a torsional problem are solved for further demonstrating and strengthening the method. Results of torsional problem are verified with experimental results. The method is applicable for material nonlinear analysis only.
کلیدواژه ها:
نویسندگان
Himanshu Gaur
Institute of Structural Mechanics, Bauhaus–Universitat Weimar, Marienstrasse ۱۵, D-۹۹۴۲۳ Weimar, Germany | Department of Civil Engineering, Middle East College, Knowledge Oasis Muscat, P.B. No. ۷۹, Al Rusayl, Muscat, ۱۲۴, Sultanate of
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :