A quantitative model for evaluation and classification of blastings in open-pit mines

سال انتشار: 1397
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 305

فایل این مقاله در 15 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

JR_JMAE-9-1_010

تاریخ نمایه سازی: 18 تیر 1398

چکیده مقاله:

By evaluation of the blasting results, a proper blast pattern can be presented. It is, therefore, essential to employ a reliable method to evaluate blastings for the effective control and optimization of the main cycle operations. This paper aims to propose a criterion for evaluating the blasting results such as the fragmentation, muckpile condition, back-break, and fly rock, and to make a possible comparison between the blast parameters including the blasting pattern, explosives used, hole depths, and volume of the blasted rocks in the lead and zinc mine in Angouran (Iran). Using the global criterion, making the decision matrix dimensionless, and defining the appropriate conditions for the results obtained, a scalar value is devoted for the blasts, whose larger values denote a larger deviation from the proper blasting conditions and express undesirable blasts regarding the blasting results. By taking into consideration the mining operation conditions and weights of the results obtained, the influence of the results obtained on the mining operation index is also investigated using the genetic algorithm. Furthermore, by composing the weighted decision matrix, the blastings are evaluated and classified. Analyzing the results obtained for blastings in the Angouran mine reveals that the proposed method is an effective approach for evaluation of the blasting results and comparison of the blasts.

نویسندگان

Seyyed M. Hoseini

Faculty of Mining, Petroleum & Geophysics Engineering, Shahrood University of Technology, Shahrood, Iran

F. Sereshki

Faculty of Mining, Petroleum & Geophysics Engineering, Shahrood University of Technology, Shahrood, Iran

M. Ataei

Faculty of Mining, Petroleum & Geophysics Engineering, Shahrood University of Technology, Shahrood, Iran