Thermoeconomic analysis of a hybrid PVT solar system integrated with double effect absorption chiller for cooling/hydrogen production
سال انتشار: 1397
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 522
فایل این مقاله در 15 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_EES-6-4_006
تاریخ نمایه سازی: 12 خرداد 1398
چکیده مقاله:
A novel solar-based combined system which is consisting of a concentrated PV, a double effect LiBr-H2O absorption chiller, and a Proton Exchange Membrane (PEM) is proposed for hydrogen production. A portion of the received energy is recovered to run a double effect absorption chiller and the rest is turned into electricity, being consumed in the PEM electrolyzer for hydrogen production. The thermodynamic and thermoeconomic analyses are performed to understand the system performance. A parametric study which is implementing Engineering Equation Solver (EES) is carried out to assess the influence of main decision parameters on the overall exergy efficiency and total product unit cost. The 2nd law analysis shows that PVT with exergy destruction rate of 76.9% of total destruction rate is the major source of irreversibility. Furthermore, in the cooling system, Cooling Set (CS) has the highest exergy destruction rate due to the dissipative components. Exergoeconomic results demonstrate that in cooling set with the lowest value of exergoeconomic factor, the cost of exergy destruction and loss has the major effect on the overall cost rate. Furthermore, results of the parametric study indicate that by decreasing PV cell’s temperature from 100 °C to 160 °C, the total product unit cost is decreased by about 1.94 $/GJ.
کلیدواژه ها:
نویسندگان
Amirmohammad Behzadi
School of Mechanical Engineering, College of Engineering, University of Tehran, P.O. Box ۱۱۱۵۵-۴۵۶۳, Tehran, Iran
Ehsan Gholamian
School of Mechanical Engineering, College of Engineering, University of Tehran, P.O. Box ۱۱۱۵۵-۴۵۶۳, Tehran, Iran
Ehsan Houshfar
School of Mechanical Engineering, College of Engineering, University of Tehran, P.O. Box ۱۱۱۵۵-۴۵۶۳, Tehran, Iran
Mehdi Ashjaee
School of Mechanical Engineering, College of Engineering, University of Tehran, P.O. Box ۱۱۱۵۵-۴۵۶۳, Tehran, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :