Friction stir welding of Al/Mg2Si metal matrix cast composite
محل انتشار: یازدهمین کنفرانس ملی جوش و بازرسی
سال انتشار: 1389
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 416
فایل این مقاله در 8 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
INCWI11_052
تاریخ نمایه سازی: 7 خرداد 1398
چکیده مقاله:
in this research, friction stir weldability of 15 wt % Mg2Si particulate aluminum matrix cast composite and effects of tool rolation speed microstructure and mechanical properties of the joints were investigated. Microstuctural observations were carried out by employing optical and scanning electron mieroscopy of the cross sections perpendicular to the tool travrse direction. mechnaical properites inclding hardness existing in eutectic were evaluated in detail. the results showed fragmentation of Mg2Si paricles and MgSi needles existing in eutectic sturcture stir zone. also. homogeneous distribulion of Mg2Si particles was obseved in the stir zone as a result of strring with high plastic strains . tension test results indicated that tensile strength of the jonint had an opimium at 1120 rpm tool rotation speed. Hardness of the jonint increased due to modofication of solidification micostructure of the base composite, this research indicates that friction stir welding is a good candidate for joning of 15 wt % Mg2Si aluminum matrix composite castings.
کلیدواژه ها:
نویسندگان
M Sharifitabar
school of metallurgy, and materials engineering, university of sistan& balachestan, zahedan, iran.
H nami
school of metallurgy and materials engineering. University of tehran, iran
H adgi
school of metallurgy and materials engineering. University of tehran, iran
H shamabadi
school of metallurgy and materials engineering. University of tehran, iran