Synthesis of pressure sensitive adhesive using emulsion polymerization of core-shell technique, effect of acrylic acid monomer on Shear strength
محل انتشار: بیستمین کنگره شیمی ایران
سال انتشار: 1397
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 308
متن کامل این مقاله منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل مقاله (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
IRANCC20_444
تاریخ نمایه سازی: 28 اردیبهشت 1398
چکیده مقاله:
Pressure sensitive adhesives (PSAs) are viscoelastic materials that can adhere strongly to solid surfaces upon application of light contact pressure and short contact time. PSAs are used for many applications (e.g. tapes and labels) and can be obtained using different technologies such as emulsion [1]. Recently, waterborne PSAs have received much attention from both industry and academia as a means for complying with environmental regulations [2]. In this paper, different values (0.56, 1.12, 1.67 and 2.21 wt%) of acrylic acid monomer have used in the preparation of the adhesive. The shear strength of the obtained adhesive increased (from 397 kPa to 501 kPa) with increasing acrylic acid concentration from 0.56 w% to 2.21 w% which studied (Fig. 1). Improvement of the shear strength with addition of the acrylic acid could be due to presence of COOH polar group affected on the adhesion of the PSAs [3].
نویسندگان
Hossein Safdari Torkaman
Department of Chemistry, Faculty of Science, Ferdowsi University of Mashhad, Mashhad, Iran.
Gholam Hossein Zohuri
Department of Chemistry, Faculty of Science, Ferdowsi University of Mashhad, Mashhad, Iran.
Mehran Gholami
Samed Manufacturing & Industrial. Co. (Mashhad Adhesive), Mashhad, Iran.
Pedram Hosseinpour Tousi
Samed Manufacturing & Industrial. Co. (Mashhad Adhesive), Mashhad, Iran.