Effective factors to reduce the problem of drilling mud drilling in drilling
محل انتشار: هشتمین کنفرانس بین المللی نفت،گاز، پالایش و پتروشیمی با رویکرد توسعه ارتباط بین دولت، دانشگاه وصنعت
سال انتشار: 1397
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 420
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
OGPD08_003
تاریخ نمایه سازی: 10 اردیبهشت 1398
چکیده مقاله:
One of the remarkable cases in drilling operations that may occur at any time during drilling is drilling mud. Considering the problems with using oily flowering flowers, the use of water based mud drilling fluid that acts like an oily flower is considered as the stabilization of shale and lubrication. Success in drilling operations depends on the drill operation, which usually depends on the factors lot depends on the type of drill used. Drilling Formation, Characteristics of Drilling Fluid, Well Depth, Drill Cover, Hydraulic Drill, and Drilling Operations. The drill performance affects the drill penetration rate proportionally and directly. With high perforation per drilling costs, drilling costs are reduced. But this is often negatively affected by drilling mud formation, as well as other factors such as alteration in lithology, can negatively affect the drill performance by decreasing the ROP. Because of this, various measures are taken to increase the amount of drilling per foot above the time spent to reduce costs, which in the opposite direction prevent and eliminate as quickly as possible the problems of reducing ROP during this efficiency is essential
کلیدواژه ها:
نویسندگان
Mohammad Khosravi Nia
Graduate student of Oil Engineering, Tehran University, Islamic Azad University, Tehran, Iran