Detecting Partial discharge using VHF sensor combined AE sensors in XLPE power cables
محل انتشار: سومین کنفرانس بین المللی مهندسی برق
سال انتشار: 1397
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 607
فایل این مقاله در 8 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ICELE03_302
تاریخ نمایه سازی: 18 اسفند 1397
چکیده مقاله:
Partial dischargh (PD) can defects in power system cables accessories . in this paper we try to design and usekind of VHF sensors (Rogowski coil) combined AE (acoustic emission) sensors to find PD defects and location inpower system XLPE cables . this way can be easy installed onsite and used safely a model of cables when PDhappening simulated with MATLAB simulation system . most frequency components of a PD pulse are below of100MHz . therefore onsite cables VHF (very high frequency) PD technique has good immunity to electromagnetic anda high signal to Noise Ratio. The results of this research had proved that the reliability of the PD detection is improvedusing the combined method.
کلیدواژه ها:
نویسندگان
Mohammad Mortazi
Department of engineering , Islamic Azad University South Tehran Branch ,Tehran, Iran
Mehdi Hamzeh Neysiyani
Department of engineering , Islamic Azad University South Tehran Branch ,Tehran, Iran
Ahmad Moradi
Department of engineering , Islamic Azad University South Tehran Branch ,Tehran, Iran