Selection of Working Conditions for Creep Feed Grinding of Nickel- Based Superalloys
سال انتشار: 1384
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,254
فایل این مقاله در 8 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ICME07_031
تاریخ نمایه سازی: 6 آذر 1388
چکیده مقاله:
Creep feed grinding is a high efficient grinding methods that can be used for the largescale material removal of nickel-based supperalloy materials. These materials are usually used in aircrafts, gas turbines, rocket engines, petrochemical equipments and other high temperature applications. The most important parameters in creep feed grinding are the surface quality and the prevention of the surface burning. The surface burning can be avoided by the proper selection of working conditions. To study the effects of working conditions (such as depth of cut, the wheel and workpiece speeds) for these materials, a series of experimental tests were performed. The experimental data are also compared with the adaptive thermal model.
کلیدواژه ها:
نویسندگان
A Vafaeesefat
Ph.D., Assistant professor School of Engineering, Emam-HossainUniversity,Tehran, Iran.Islamic Azad University, Science and research, Tehran, Iran
A Farhang
MSC, Graduate Student
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :