Influence of the type of coolant lubricant on the grinding with CBN-tools
سال انتشار: 1384
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,319
فایل این مقاله در 8 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ICME07_019
تاریخ نمایه سازی: 6 آذر 1388
چکیده مقاله:
Oil and emulsion are two main grinding coolant lubricants used in grinding process with CBN tools. As the long systematic researches in KSF, the comparison of these two CLs was performed . The comparison criterion presented in this paper are grinding forces and G-Ratio. The results show that oil presents better function almost in every cases for the selected grinding parameters and workpiece. However it should be notified that the results can probably be different with other type of oil and emulsion.
کلیدواژه ها:
نویسندگان
T Tawakoli
Prof. Dr. Mech. Eng., Head of KSF Competence Center of Grinding Technology and Superfinishing (KSF)University of Applied Science Furtwangen,Villingen-Schwenningen, Germany
A Rasifard
M.Sc. Mech. Eng., Researcher
M Rabiey
M.Sc. Mech. Eng., Researcher
E Westkämper
Prof. Dr. Mech. Eng., Head of IFF