BUCKLING ANALYSIS OF NANOCOMPOSITE TIMOSHENKO BEAM USING EXPERIMENTAL TEST TO OBTAIN THE MECHANICAL PROPERTIES

سال انتشار: 1397
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 547

فایل این مقاله در 7 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

ISME26_611

تاریخ نمایه سازی: 30 دی 1397

چکیده مقاله:

The current research is analyses of the buckling response of composite and nanocomposite Timoshenko beam reinforced with carbon nanotubes (CNT). By using experimental test mechanical properties such as Youug’s and shear modulus are obtained. By applying Hamilton s principle. the governing equations of equilibrium are derived for Timoshenko theory and then Navier’s type solution is used to solve the governing equations. The comparison provides a good agreement between obtained results and similar researches. In this composite beam, glass fiber is used in an epoxy matrix and for nanocomposite. CNTs are applied as reinforcement particles. The critical buckling loads of nanocomposite beams for different length to thickness ratio are obtained. It is concluded that adding just a small amount of carbon nanotubes increases critical buckling load of composite beams. Also. the influences of different manufacturing processes such as hand lay-up and industrial methods using vacuum pump on composite properties are investigated and it is found that accuracy of manufacturing process has a significant effect on buckling of nanocornpositc

کلیدواژه ها:

Buckling analysis ، Nano composite ، Experimental test and manufacturing ، Hand layup method

نویسندگان

mehdi mohammadimehr

Department of Solid Mechanics, Faculty nfllvfeehanical Engineering, University of Kashan

mostafa bamdad

’M.sc Student Faculty of Mechanical Engineering University of Kashan

kazem alambeigi

’M.sc Student Faculty of Mechanical Engineering University of Kashan