Numerical Survey of Relevency Between High Grade of Filler With Final Shirinkage of RTM Panel
محل انتشار: دهمین کنفرانس ملی مهندسی ساخت و تولید
سال انتشار: 1388
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 2,165
فایل این مقاله در 8 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ICME10_031
تاریخ نمایه سازی: 29 آبان 1388
چکیده مقاله:
Researchers achievements in Resin transfer molding (RTM) process have resulted in a rapid growth of the number of RTM applications. hermoplastic melt viscosity is influenced primarily by process temperature and shear rate. It means that by increase melt temperature and of course fast growths of viscosity due to a faster chemical reaction, the curing reaction is accelerated and therefore a higher degree of conversion can be obtained at a given time.Shear stresses developed during mold filling are significant contributor to a part’s residual stress and development of anisotropic shrinkages and its tendency to warp. This paper presents a study that evaluates the relationship of bulk conversions predicted from MPI software with shrinkage of different filler weight fractions.
کلیدواژه ها:
RTM – Simulation - Residual stress - Bulk conversion -Shrinkage
نویسندگان
Hadi Sedaghat Pishe
MSc. Student, Faculty of Mechanical Engineering, University of shahre-kord
Hossein Golestanian
Assistant Professor, Faculty of Mechanical Engineering, University of Shahre-kord
Taher Azdast
Assistant Professor, Faculty of Engineering,Mechanical Engineering Department, Urmia University