Vibration Control in Machine Tools Using Time Delay Resonator Absorber
سال انتشار: 1386
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,652
فایل این مقاله در 8 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ICME08_239
تاریخ نمایه سازی: 27 آبان 1388
چکیده مقاله:
The vibration of machine tools during machining adversely affects machining accuracy and tool life, and therefore must be minimized. This paper presents a delay resonator (DR) to minimize relative vibration between the cutting tool and workpiece during machining process. The DR is an actively tunable vibration absorber which converts a conventional passive absorber into a marginally stable resonator. This structure absorbs all the vibratory energy at its point of attachment. A strategy called ''Stability charts'' is used not only to resolve the stability question but also to find out the gain and time delay of the absorption. Results show that relative motion between cutting tool and workpiece reduced significantly.
کلیدواژه ها:
نویسندگان
A Farshidianfar
Assistant professor Department of Mechanical Engineering,Ferdowsi University, Mashhad, Iran
M.S Gholami
M. Sc. Student Department of Mechanical Engineering,Ferdowsi University, Mashhad, Iran
P Naeemi Amini
M. Sc. Student
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :