Optimization design and buckling analysis of hybrid FRP drive shaft by considering shear and natural frequency

سال انتشار: 1394
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 316

فایل این مقاله در 6 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

NCAM02_027

تاریخ نمایه سازی: 1 دی 1397

چکیده مقاله:

Today, the composite drive shafts because of theiradvantages are used for many purposes. In this research,we tried to analysis the composite pipe by specificationof drive shaft. The capability of composite pipe totransmit a steady state torque under torsion calculatedand torsional buckling, Natural frequency and its modeshapes were studied by MATLAB and ANSYSsoftware. In this research Carbon/Epoxy andGlass/Epoxy plies by orientation of 0 and 90 deg wereused for design an optimum drive shaft by someconstrain. These constrain are Buckling, shear andfrequency. In addition, weight considered foroptimization because of the importance in cost ofproducts. The parameters of optimization are numbersof each material plies and their orientations. The Vonmisses Stress calculations were then compared to afinite element model (FEM) developed in ANSYSsoftware and by use of ANSYS software the modeshapes of natural frequency was calculated.

نویسندگان

O Sarvi Ghiasabadi

Department of Mechanical engineering, Shiraz University, Iran

M Abedi

Department of Mechanical engineering, Shiraz University, Iran

S Bahgbani Nowbandegani

Department of Mechanical engineering, Islamic Azad University branch the Neyriz, Iran