Design and Manufacturing of Modified Column Flotation Cell (3PC)
محل انتشار: کنفرانس مهندسی معدن ایران
سال انتشار: 1383
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 2,778
فایل این مقاله در 7 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
IMEC01_021
تاریخ نمایه سازی: 14 اسفند 1384
چکیده مقاله:
To study the effect of froth drop back (FDB) on copper concentrate grade a column with special shape in washing zone was designed and manufactured in Sarcheshmeh copper complex of Iran. The column’s height is 500 cm with the diameter of 6 cm. The three product column (3PC) is made of plexyglass material with a special elbow. This column has shown to yield, clean, high-grade concentrates because it separates the froth-rejected particles (drop-back or third product) selectively and uses two washing water entrances. This column is suitable to study Jw , JB , FDB and wash water addition point in conventional flotation columns. This cell showed promising results in terms of enrichment ratio as a copper cleaner. Also copper concentrate grade of 23.5% was acheived.
کلیدواژه ها:
نویسندگان
R. Atash-Dehghan
R&D Division, Sarcheshmeh Copper Complex, Rafsanjan, Iran
M. Kolahdoozan
Assistant Professor, Dept. of Mining Eng., University of Tehran, Iran
A. H. Koohsari
Assistant Professor, Dept. of Mining Eng., University of Yazd, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :