A Comparison between the Fracture Behavior of Al/SiC Composites in As-Cast and Extruded States
محل انتشار: نهمین کنفرانس مهندسی ساخت و تولید
سال انتشار: 1387
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 2,344
فایل این مقاله در 5 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ICME09_291
تاریخ نمایه سازی: 5 آبان 1388
چکیده مقاله:
In this research, effect of hot extrusion process on tensile properties and fracture mechanism of Al/SiC composites was investigated. The composite ingots were fabricated by stir casting and were extruded at 500?C at a ram speed of 1mm/s and at the extrusion ratio of 18:1. The extruded samples exhibited improved mechanical properties in comparison with the as-cast ones. The as-cast specimens comprised of cracking of the SiC particle clusters leading to brittle fracture, whereas the extruded samples showed some ductility
کلیدواژه ها:
نویسندگان
Amir Pakdel
M.Sc. Graduate, Department of Metallurgy and Materials Engineering, University of Tehran
H. Farhangi
Associate Professor, Department of Metallurgy and Materials Engineering, University of Tehran
M. Emamy
Associate Professor, Department of Metallurgy and Materials Engineering, University of Tehran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :