The Novel Method for Rising up the Shear Strength and Limiting the Growth of Cracks in Deep Beams with SMA

سال انتشار: 1396
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 443

فایل این مقاله در 14 صفحه با فرمت PDF و WORD قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

ENGCONF01_106

تاریخ نمایه سازی: 13 مهر 1397

چکیده مقاله:

Deep beams are considered to be important structural components due to their high using in civil engineering, including in tall buildings, silos. The presence of openings in the deep beam will reduce the shear capacity of the beam, so it is important to use the new methods such as the use of resistive shape memory alloys. Shape memory alloys (SMA) are a series of metals that can permanently restructure deformations and strains and eventually reinstate in their original form. Due to its high corrosion resistance and good mechanical properties, high ductility and high compatibility with building members, these alloys can be used as an appropriate option for the reinforcement of deep beams. Because the reinforcement with FRP strips has problems such as FRP layers separation, SMAs can be a good alternative to improving the beam s deep resistance performance. The purpose of this study was used the novel method which was analyzed the influence of SMA on the behavior of deep beams with the opening and compared them with FRP layers.

کلیدواژه ها:

نویسندگان

reza aghayari

Associate Professor, Structural Engineering, Razi university, Kermanshah, Iran

fatemeh rahimi

PhD student ,Structural Engineering, Razi university, Kermanshah, Iran