Comparison between the tensile strength and micro hardness of Nano adhesives
محل انتشار: پنجمین کنفرانس بین المللی کامپوزیت
سال انتشار: 1395
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 338
متن کامل این مقاله منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل مقاله (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
COMPOSIT05_074
تاریخ نمایه سازی: 6 مهر 1397
چکیده مقاله:
In this research improvements in mechanical properties of an epoxy adhesive modified by graphen oxide nano-plates (Gops) were investigated by tensile testing and Micro-indentation. Single lap adhesive joints were manufacured using and unreinforced and adhesives and tested under tensile loading and microindentation. The results showed that the shear strengh and the micro-hardness of the adhesive were improved by 29% and 10% respectively,by adding 0.1 weight percentage of Gops to adhesive. Howerethe shear strengh values of 0.1 wt% were declined by 13% than by shear strength of 0.3 wt%.
کلیدواژه ها:
نویسندگان
M JALALI
MSc student, Department of Mechanical Engineering, University of IUST
H khoramishad
Assistant Professor, Department of Mechanical Engineering, University of IUST