Micro-Hardness and Microstructure of Mg/SiC Metal Matrix nano-Composites

سال انتشار: 1395
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 319

متن کامل این مقاله منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل مقاله (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

COMPOSIT05_060

تاریخ نمایه سازی: 6 مهر 1397

چکیده مقاله:

In this study, Mg/SiC nano-composite has been fabricated using powder metallurgy and warm rolling method. First, Mg and nano SiC particles with two different volume percent (1.0 vol% and 3.0 vol%) have been ballmilled. Then, the mixtures have been cold-pressed and sintered, respectively. Finally, warm-rolling process has been implemented on the specimens at 300ºC for six passes. Moreover, the results were compared to monolithic magnesium specimen, which were produced in the same way as the composites (without reinforcement particles). The scanning electron microscopy (SEM) examination of composite specimens reveals an acceptable distribution of SiC particles. Also, the results show that increasing the presence of SiC nano-particles and the number of rolling passes enhance the Micro-Vickers hardness of the composites, although grain size refinement is not considerable.

نویسندگان

S Mohammadi

Graduated Student,Department of Mechanical Engineering, Iran University of Science & Technology, Narmak, ۱۶۸۴۶۱۳۱۱۴, Tehran, Iran

A.H Jabbari

PHD.STUDENT,Department of Mechanical Engineering, Iran University of Science & Technology, Narmak, ۱۶۸۴۶۱۳۱۱۴, Tehran, Iran

M Sedighi

Associate Professor Department of Mechanical Engineering, Iran University of Science & Technology, Narmak, ۱۶۸۴۶۱۳۱۱۴, Tehran, Iran