A Parametric Study on the Formation of a Circular Hydraulic Jump by Volume-of-Fluid Method
محل انتشار: ششمین کنگره بین المللی مهندسی شیمی
سال انتشار: 1388
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,764
فایل این مقاله در 7 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ICHEC06_225
تاریخ نمایه سازی: 1 مهر 1388
چکیده مقاله:
The vertical impact of an axisymmetric liquid jet on a horizontal and solid surface which leads to the formation of a circular hydraulic jump (CHJ) is numerically simulated in this study by using the Volume-of-Fluid (VOF) method. This numerical method is shown to be capable of simulating the hydraulic jump. The numerical results of the dependence of jump radius on the volumetric flow rate are confirmed by the experimental observations. Also the numerical results are compared with the only available theory for CHJ and the reversed flow in the jump is captured by the numerical simulation. The effect of downstream height, which is a very important factor in CHJ, is also studied in this paper and the results show that increasing this height will reduce the radius of the jump.
کلیدواژه ها:
نویسندگان
Mohammad Khavari
Graduate Student, Mechanical Eng. Department, Ferdowsi University of Mashhad, Iran
Mohammad Passandideh-Fard
Associate Professor, Mechanical Eng. Department, Ferdowsi University of Mashhad,
Ali Reza Teymourtash
Assistant Professor, Mechanical Eng. Department, Ferdowsi University of Mashhad, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :