Subsidence and Heave Modelling Using CMG Software
سال انتشار: 1397
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 584
فایل این مقاله در 15 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
CCES04_017
تاریخ نمایه سازی: 11 شهریور 1397
چکیده مقاله:
There is a strong interest in the modeling of reservoir fluid flow with geomechanical deformation. Coupling between reservoir flow and geomechanics has been discussed by many authors. Any coupling approach should satisfy, adaptability, Running speed and logical aspects to some degree. Three different widely used time-coupling techniques (one way, Iterative and full coupling) are reviewed and analyzed based on these three aspects. Fluid flow and geomechanics equation reviewed and injectionproduction case is studied to show heave and subsidence phenomenon when constitutive Laws is linear elastic or non-linear hyperelastic with different coupling method.
کلیدواژه ها:
نویسندگان
Mohamadreza Najmedini
Department of Chemical & Petroleum Engineering, Sharif University of Technology
Reza Habibi
Department of Chemical & Petroleum Engineering, Sharif University of Technology