Impact of Sulfur Replacement ratio on Mechanical Behavior of Sulfur Polymer Concrete based on Available Material Resources in Azarbaijan
محل انتشار: نخستین کنفرانس بین المللی بتن
سال انتشار: 1388
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,624
فایل این مقاله در 9 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ICCT01_162
تاریخ نمایه سازی: 19 شهریور 1388
چکیده مقاله:
This study has focused on evaluating the unit weight, compressive strength and modulus of elasticity of Sulfur Polymer Concrete (SPC) with different Sulfur Replacement Ratio (SRR). SPC at this study was manufactured using some recycled waste materials such as elementary Sulfur (by-product from Tabriz petroleum refinery), local gravel and sand. For determining optimum mix design, different mix design was produced by authors at lab with 10%, 20%, 25%, 30%, 35% and 40% of SRR with 5% and 20% of silty filler. Variation of unit weight, compressive strength andmodulus of elasticity at different SRR was investigated and then compared with regular Portland Cement Concrete (PCC) that was made by the authors with same aggregate
کلیدواژه ها:
نویسندگان
M Rezaie
M.Sc. on structural Eng., Zaminjarfab Consulting Eng. Co, Structural Dept.
H Eskandari
M.Sc. on Structural Eng. IslamicAzad university of Maragheh
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :