2D and 3D Geometric Modeling of Marine Propellers
محل انتشار: دهمین همایش ملی صنایع دریایی ایران
سال انتشار: 1387
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 2,994
فایل این مقاله در 10 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
NSMI10_041
تاریخ نمایه سازی: 27 مرداد 1388
چکیده مقاله:
This paper investigates the formulation and the methos of the 2Dand 3D geomaetry transformation of propeller. Two geometry codes, namely 2D and 3D codes, are developed for the geometry of propeller. The 2D code can tranform any 3D geometry to 2Done , and achieves the geometrical specifications such as pitch, skew and chord distribution. The 3D code is employed for transforming the 2D expanded view to the 3D propeller The complete model is then obtained by transforming the whole geometry in to surface & volume using CAD softwares. The codes are employed on the 6 blade left-handed and 4 blade right- handed propellers, and both the 2D and 3D results are compared and verified with the other softwares. The method is then applied to obtain the 2D geometry of an unknown surface piercing propeller(SPP).
کلیدواژه ها:
Marine Propeller - 2D and 3D Geometry - Blade Section
نویسندگان
Reza Shamsi
MSc of Naval Architecture , Toos Darya Co, Mashhad, Iran
Saeed Soheili
phD Student of Mechanical Engineering Ferdowsi University of Mashhad, Iran
Ali Akbar Hamooni
BSc of Mechanical Engineering , Toos Darya Co, Mashhad, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :