A Novel Design of Single-Stage CMOS Distributed Amplifier Based on Bulk-Driven Technique
سال انتشار: 1396
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 378
فایل این مقاله در 7 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
COMCONF05_343
تاریخ نمایه سازی: 21 اردیبهشت 1397
چکیده مقاله:
This paper presents the design of a CMOS distributed amplifier simulated in a 0.13µm CMOS model that use of bulk-driven technique in order to reduce noise figure. A loss compensation technique is Employed to remove high frequency losses of transmission lines and Bandwidth extension. The single-stage DA is simulated in 0.13 µm CMOS process and provides a 17 ± 0.7 dB gain over a bandwidth of 17.5 GHz. The input/output return loss of the amplifier is lower than -10 dB over the entire bandwidth, with an average noise figure of 2.5 dB and 105 mW DC-power consumption, while circuit input and output are matched with 50 Ω resistance
کلیدواژه ها:
نویسندگان
Kazem Nedaee
Department of electrical engineering, Shahid Bahonar University, Kerman, Iran
Ali Ghiyasvand
Department of electrical engineering, Shahid Bahonar University, Kerman, Iran
Ahmad Hakimi
Department of electrical engineering, Shahid Bahonar University, Kerman, Iran