Influence of Circular and Square Cut-outs on Fiber Glass/Epoxy Composite Laminate under Tensile Loading
محل انتشار: ماهنامه بین المللی مهندسی، دوره: 31، شماره: 1
سال انتشار: 1396
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 458
فایل این مقاله در 6 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
JR_IJE-31-1_015
تاریخ نمایه سازی: 1 اردیبهشت 1397
چکیده مقاله:
Use of composites for a range of structural application in aircrafts, space-crafts, automobiles, etc., has widely spread in the last few years. Other than weight reduction, cut-outs provide pathways to link different aircraft parts. In this paper, an experimental investigation was conducted to study the effect of a cut-out on the tensile strength of the fiber glass/ epoxy composite plate. Geometry of the cut-out is one of the important factors which can critically alter the mechanical properties. So, cut-outs with various geometrical shapes such as square and circle were introduced in the fiber glass/ epoxy composite plate and tensile tests were performed under ambient conditions. It was determined from the tests that specimens with circular cut-out have higher tensile strength as compared to specimens with square cut-out.
کلیدواژه ها:
نویسندگان
K Priya Jhanji
School of Aeronautical Sciences, Hindustan Institute of Technology and Science, Chennai, India
R Amit Kumar
School of Aeronautical Sciences, Hindustan Institute of Technology and Science, Chennai, India
PVN Likhith
School of Aeronautical Sciences, Hindustan Institute of Technology and Science, Chennai, India