Synthesis and characterization of thin films iron oxides by anodization method
سال انتشار: 1396
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 370
فایل این مقاله در 7 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
IMES11_114
تاریخ نمایه سازی: 7 اسفند 1396
چکیده مقاله:
In this study, iron oxides (hematite and magnetite) thin films were prepared on low carbon steel sheets, in basic solution (KOH) as electrolyte, by electrochemical anodization method with direct current. The effects of KOH concentration, potential, processing time and additives were investigated. Design of experiment (DOE) method was utilized and the optimum of parameters was improved to obtain the highest porosity and highest free surface to volume ratio of the particles. Finally, the films were characterized by scanning electron microscopy (SEM), x-ray diffraction (XRD) and energy dispersive x-ray spectroscopy (EDS) techniques. By adjusting the value of concentration of solution, time and potential of anodizing, the oxide film was held on the base and thickness and porosity of the film were controlled.
کلیدواژه ها:
نویسندگان
Mohammad Navid Haddadnezhad
School of Metallurgy and Materials Engineering, University of Tehran, Iran
Fereshteh Rashchi
Associate Professor School of Metallurgy and Materials Engineering University of Tehran
Rasoul Khayyam Nekouei
School of Materials Science and Engineering, University of New South Wales, Sydney, Australia
Mohadese Beigtan
School of Metallurgy and Materials Engineering, University of Tehran, Iran