High-yield synthesis of multi walled carbon nanotubes using zeolite as a supported iron catalyst: Effect of zeolite textural properties and its morphology
محل انتشار: همایش بین المللی ژئولیت ایران
سال انتشار: 1387
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,659
متن کامل این مقاله منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل مقاله (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ZEOLITE01_203
تاریخ نمایه سازی: 30 دی 1387
چکیده مقاله:
The effect of the textural properties and morphology of zeolite, used as support of iron (Fe), on the
quantity and quality of the multi-wall carbon nanotubes (MWNTs) synthesized by catalytic chemical vapor
deposition (CCVD) of acetylene was studied. The parent zeolite 4A was modified by various dealumination
procedures. In this work, catalyst (Fe) and catalyst support (zeolite) are Fe/zeolite in ratio 1:10, acetylene
(C2H2) was used as source of carbon and mixture of N2 and H2 as the carrier gases. Characterization of the
carbon nanotubes was carried out using scanning electron microscope (SEM), thermo-gravimetric analysis
(TGA), zeta-sizer and Raman spectroscopy. Also, high resolution transmission electron microscope
(HRTEM) images and micro-Raman spectra taken right after growth confirmed the formation of high quality
MWNTs with a low degree of disorder irrespective of the catalysts used, the degree of dealumination of the
zeolite 4A and the textural and morphological characteristics of the zeolitic support. It is detected that the
nanotubes have the inner diameter about 5-10 nm and they are highly uniform. As the matter of fact, this
special structure guarantees its usage in the world of nano-composites as reinforcement material. The ionexchange
and wet impregnation methods were used for supporting the metals on the zeolite 4A samples, with
the latter method providing the most effective catalysts for multi walled carbon nanotube (MWCNT)
formation.
کلیدواژه ها:
نویسندگان
Sahebali manafi
Materials Engineering Department, Islamic Azad University, Shahrood Branch, Shahrood, Iran
Sedigheh Joughehdoust
Biomedical Engineering Faculty of Islamic Azad University, Science & Research Branch Center, Tehran, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :