Comparison between splitting process of metal frusta and metalcircular tube
محل انتشار: دومین کنفرانس بین المللی مهندسی مکانیک و هوافضا
سال انتشار: 1396
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 429
فایل این مقاله در 5 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
MECHAERO02_259
تاریخ نمایه سازی: 13 شهریور 1396
چکیده مقاله:
Axial splitting has been recognized as an efficient energy dissipation mechanism for obtaining a relatively constant force over a long stroke. This paper investigates axial splitting of metal frusta, experimentally. Specimens were prepared using spinning method and were tested using Zwick testing machine with cross-head speed of 5 mm/min and compressed between a rigid plate on top and a rigid conical die with the semi-apical angle of 60˚. Also, load-displacement diagrams, deformations and energy absorption capacity of frusta and metal circular tube are compared with each other, during axial splitting. Each axial splitting process contains five steps which have been studied in detail in this research.
کلیدواژه ها:
نویسندگان
Seyed Mohammad Elahi
Mechanical and Aerospace Engineering Department, Shiraz University of Technology, Shiraz, Iran
Jafar Rouzegar
Mechanical and Aerospace Engineering Department, Shiraz University of Technology, Shiraz, Iran
Hasan Asaee
Mechanical and Aerospace Engineering Department, Shiraz University of Technology, Shiraz, Iran