Comparative CFD Analysis of Three Wind Turbine Airfoils
محل انتشار: بیست و پنجمین همایش سالانه مهندسی مکانیک
سال انتشار: 1396
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 390
متن کامل این مقاله منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل مقاله (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ISME25_183
تاریخ نمایه سازی: 13 شهریور 1396
چکیده مقاله:
Wind energy has been experienced as one of the most usefulsources of renewable energy. The most common device thatis used to harvest energy from wind is the wind turbine.Blade is a key element in a wind turbine. The airfoil of theblade structure has an important role in the hydrodynamicproperties of the blade in parallel with air flow conditions.In this paper three airfoils with different thickness fromNACA family, 0012, 0015 and 0018 have been simulatedand analyzed. The results of simulation are compared withexperimental results. Results indicate that as the Reynoldsnumber increases, a higher maximum lift coefficient isproduced in all airfoils. The NACA 0012 produces lowermaximum lift, but stalls at a higher angle of attack comparedto the NACA 0015 and NACA 0018 airfoil. Late stallreduces the noise during operation of the turbine. The resultscan be used to guide the selections of the geometricparameters and constraints in an aerodynamic optimizationof wind turbine blade’s airfoils.
کلیدواژه ها:
Energy- Airfoil- Wind Turbine- Lift
نویسندگان
Negin Maftouni
Faculty member at Alzahra University, Faculty member at Mechanical Engineering Group, Faculty of Engineering, Alzahra University, Tehran, Iran
Fahime Hamedi
MS Student, Mechanical Engineering Group, Faculty of Engineering, Alzahra University, Tehran, Iran
Zahra Ghaffarpour
Mechanical Engineering Group, Faculty of Engineering, Alzahra University, Tehran, Iran