Investigating electrochemical drilling (ECD) using statistical and soft computing techniques

سال انتشار: 1394
نوع سند: مقاله ژورنالی
زبان: انگلیسی
مشاهده: 346

فایل این مقاله در 11 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

JR_JCARME-4-2_007

تاریخ نمایه سازی: 7 شهریور 1396

چکیده مقاله:

In the present study, five modeling approaches of RA, MLP, MNN, GFF, and CANFIS were applied so as to estimate the radial overcut values in electrochemical drilling process. For these models, four input variables,namely electrolyte concentration, voltage, initial machining gap, and tool feed rate, were selected. The developed models were evaluated in terms of their prediction capability with measured values. It was clearly seen that theproposed models were capable of predicting the radial overcut. However, the MLP model predicted the radial overcut with higher accuracy than the other models. The statistical analysis showed how much the radial overcut wasmainly influenced by voltage and electrolyte concentration during the electrochemical drilling process

نویسندگان

Mehdi Tajdari

Department of Mechanical Engineering, Islamic Azad University, Arak Branch, Arak, Iran

Saeed Zare Chavoshi

Department of Mechanical Engineering, Islamic Azad University, Arak Branch, Arak, Iran