Mechanical properties and adhesion of Ti/TiN/TiAlN and Cr/(Ti,Cr)N PVD Multilayer coatings deposited on GTD 450
محل انتشار: چهارمین کنفرانس ملی و دومین کنفرانس بین المللی پژوهش های کاربردی در مهندسی برق، مکانیک و مکاترونیک
سال انتشار: 1395
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 463
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ELEMECHCONF04_096
تاریخ نمایه سازی: 11 مرداد 1396
چکیده مقاله:
In compressor blades which are prone to abrasion caused by particles in the air, wear-resistant coating deposited on the blades to protect their surface against damage. Multilayer coatings Ti/TiN/TiAlN and Cr/(Ti,Cr)N was deposited on GTD 450 (blade material) by PVD method. SEM and WDX analysis from surfaces and cross-sectioned coated samples were performed. Then mechanical properties of coating like hardness and Yong modulus evaluated by nanoindentation testing. SEM results showed that Cr/(Ti,Cr)N has good adhesion to substrate compared to Ti/TiN/TiAlN which has a locally delamination areas. Nanoindentation results showed that Hardness and Yong modulus of both coatings are in the same rang. Adhesion state of coating probably is due to residual stress generating during deposition process
کلیدواژه ها:
نویسندگان
Ahmad Azizpour
Department of Mechanical Engineering, University of Zanjan, Zanjan, Iran
Esmaeil Poursaeidi
Department of Mechanical Engineering, University of Zanjan, Zanjan, Iran
Asma Soleymani
Department of Mechanical Engineering, University of Zanjan, Zanjan, Iran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :