LRB and FPS Seismic Isolators: A Comparative Review

سال انتشار: 1395
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 391

فایل این مقاله در 9 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

ICRSIE02_174

تاریخ نمایه سازی: 11 مرداد 1396

چکیده مقاله:

Seismic Isolation is one of the easiest solutions to reduce the damage caused by earthquakes on structures. This method which is classified as a passive structure control system, by decreasing the base acceleration and increasing the base period of building, helps with significantly reducing the devastating effects of earthquakes on structures and objects and people inside buildings. Decades after design, construction and deployment of the first seismic isolator, various types of isolators and their feasibility in different situations and structures have been examined. Nonetheless, any comprehensive comparison between different types of isolators has not been done yet. Sliding systems are the simplest and most primitive types of isolators made. However, it is the rubber bearings that have been used more widely in a large variety of buildings. Each type of isolators has their own particular strengths and weaknesses that become visible in structural or environmental conditions. Among the rubber seismic isolators, lead-rubber bearings and among the sliding isolators, friction-pendulum isolators have the best performance in different structures and became the most widely used seismic isolators. In this article, firstly, the fundamentals of seismic isolation and an introduction to the variety of isolators is mentioned, then mechanical properties and the equations of motion of two types of seismic isolators: Lead-Rubber Bearings and Friction-Pendulum Systems are examined and their strengths and weaknesses are compared. Then the results of previous researches in comparison of two types of seismic isolators to be implemented in bridges and buildings are summarized and in the end, findings are presented.

کلیدواژه ها:

نویسندگان

Pouya Mohammadi Ghazijahani

Bachelor of Civil Engineering, Department of Civil Engineering, Faculty of Engineering, Azarbaijan Shahid Madani University, ۳۵ km. of Tabriz-Maragheh Road, Tabriz, Iran,

Abdolhossein Fallahi

Assistant Professor, Department of Civil Engineering, Faculty of Engineering, Azarbaijan Shahid Madani University, ۳۵ km. of Tabriz-Maragheh Road, Tabriz, Iran,

مراجع و منابع این مقاله:

لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :
  • Naeim, F., 1989, The seismic design handbook, Springer Science 8& ...
  • Buchanan, A. H., Pampanin, S., Bull, D., MacRae, G., Dhakal, ...
  • Kalantari, A. 25-26 December, 2015, The Fourth Professional Training Course ...
  • Motamedy, D., 2007, Investigation of the Effect of the Vertical ...
  • Naeim, F., and Kelly, J. M., 1999, Design of seismic ...
  • Elgamal, A., & Fraser, M., 2004, Seismic isolation and energy ...
  • Palazzo, B., Castaldo, P., & Amendola, G., 2015, Seismic reliability ...
  • Lei, Y. H., & Chien, Y. L., 2004, Applications of ...
  • Sharbatdar, M. K., Vaez, S. H., Amiri, G. G., & ...
  • نمایش کامل مراجع