EFFECTS OF DFFERENT THCKNESSES OF FILLER METAL, ONMECHANICAL AND METALLURGICAL PROPERTES OF BRAZED JONTSOFTUNGSTEN CARBDE AND CARBON STEEL

سال انتشار: 1390
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 288

فایل این مقاله در 6 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

UFGNSM03_227

تاریخ نمایه سازی: 10 تیر 1396

چکیده مقاله:

Joining of hard metals such as, cemented tungsten carbides, to structural steels received much attention due to its compensatory properties. The most important problem is their different atomic structure which leads to high induced thermal stresses. Vacuum brazing is one of the choices that provide most of the desired characteristics. This study focused on vacuum brazing of WC-Co hard metal to carbon steel in an electrical tube furnace using Ag-Cu-Ti as filler material. The process has been conducted using various filler metal thicknesses (100, 250 and 500pm) at a constant temperature of 850 °C. The effect of process parameters on the joint microstructure has been investigated using optical microscopy and scanning electron microscopy (SEM). Moreover, the shear strength of the joints has been determined.

نویسندگان

S. SAKHAE

School of Metallurgy & Materials Engineering, College of Engineering, University of Tehran, Tehran, Iran

A. M. HADIAN

School of Metallurgy di Materials Engineering, College of Engineering, University of Tehran, Tehran, Iran