THE EFFECT OF SPRAYING DSTANCE AND AGGLOMERATE SIZE ONTHE PROPERTIES OF NANOSTRUCTUREDYSZ, THERMAL BARRERCOATINGS APPLIED BY APS

سال انتشار: 1390
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 366

فایل این مقاله در 6 صفحه با فرمت PDF قابل دریافت می باشد

استخراج به نرم افزارهای پژوهشی:

لینک ثابت به این مقاله:

شناسه ملی سند علمی:

UFGNSM03_028

تاریخ نمایه سازی: 10 تیر 1396

چکیده مقاله:

Thermal barrier coatings (TBCs) are widely used in the hot sections of gas turbines. Nanostructured yttria stabilized zirconia (YSZ) as a ceramic top coat increases TBC properties. In this paper nanostructured YSZ (3 mol%. Y.O.) thermal barrier coatings were deposited by air plasma spray (APS) on a St37 substrate. The microstructure of the coating was characterized with scanning electron microscopy (SEM) and it was observed that a nanostructured coating present a bimodal distribution in its microstructure. In addition, the influence of spraying parameters on properties of nanostructured TBCs were discussed. It was found that nanostructured coatings with fine agglomerate size have an excellent thermal shock resistance and great adhesion strength.

کلیدواژه ها:

نویسندگان

NEGIN JAMSHIDI

School of Metallurgy and Materials Engineering, Iran University of Science & Technology, Tehran, Iran

SHAMSODDIN MIRDAMADI

School of Metallurgy and Materials Engineering, Iran University of Science & Technology, Tehran, Iran

SAEED RASTEGARI

School of Metallurgy and Materials Engineering, Iran University of Science & Technology, Tehran, Iran

SEYREDHOJA TOLLAH HOSSETNI

School of Metallurgy and Materials Engineering, Iran University of Science & Technology, Tehran, Iran