Construction of 1D Geomechanical Model and Comparison between Mohr-Coulomb and Mogi-Coulomb failure criteria in Bangestan Reservoir in Ahwaz Oilfield
محل انتشار: دومین کنفرانس ملی ژئومکانیک نفت
سال انتشار: 1395
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 580
متن کامل این مقاله منتشر نشده است و فقط به صورت چکیده یا چکیده مبسوط در پایگاه موجود می باشد.
توضیح: معمولا کلیه مقالاتی که کمتر از ۵ صفحه باشند در پایگاه سیویلیکا اصل مقاله (فول تکست) محسوب نمی شوند و فقط کاربران عضو بدون کسر اعتبار می توانند فایل آنها را دریافت نمایند.
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
NPGC02_067
تاریخ نمایه سازی: 10 تیر 1396
چکیده مقاله:
The mechanical earth model is the core of any geomechanical analysis, and as such, drives the accuracy of all subsequent rock mechanic answer products. The MEM consists in integrating data from various sources into a model that provides the rock mechanical attributes of a formation. It is fundamentally comprised of elastic properties, rock strength, pore pressure, as well as the in-situ stress magnitudes and direction. In this paper, at first, a 1D geomechanical model has been constructed. Magnitudes of stresses are calibrated by using the results of XLOT test and failure analysis which is performed with Mohr-Coulomb and Mogi-Coulomb failure criteria. The results show that performance of Mogi-Coulomb criterion in prediction of actual failures is better than Mohr-Coulomb criterion.
کلیدواژه ها:
نویسندگان
Hamed Amiri
Corresponding Author: MS student of petroleum engineering, Shahrood University of Technology
Ahmad Ramezanzadeh
Assistant professor of Minig, Petroleum and Geophysics faculty, Shahrood University of Technology
Mohammadreza Parhizgar
Geomechanical expert, National Iranian South oilfields Company,