FINITE ELEMENT MODELING AND INVESTIGATION OF THE EFFECTS OF MASONRY INFILLS ON THE BEHAVIOR OF REINFORCED CONCRETE (RC) FRAMES
محل انتشار: سومین کنفرانس بین المللی بتن و توسعه
سال انتشار: 1388
نوع سند: مقاله کنفرانسی
زبان: انگلیسی
مشاهده: 1,842
فایل این مقاله در 11 صفحه با فرمت PDF قابل دریافت می باشد
- صدور گواهی نمایه سازی
- من نویسنده این مقاله هستم
استخراج به نرم افزارهای پژوهشی:
شناسه ملی سند علمی:
ICCD03_021
تاریخ نمایه سازی: 20 مهر 1387
چکیده مقاله:
In this study, a finite element model for masonry-infill of RC frames has been introduced. The micro model incorporates the bricks, bed and head joints, surrounding RC frame and the interface between frame and masonry infill. The results of the analysis have been validated by experimental data reported in the literature. A parametric study has been conducted and the effects of strength, stiffness, aspect ratio of infill panels and the effect of relative stiffness of frame to masonry panel on lateral response of the structure have been investigated. It was found that infill panels increase stiffness and ultimate strength of the frames significantly, and by increasing stiffness and strength of infill, stronger failure mechanisms are activated, and failure of masonry panels shift to failure of concrete frame. It was also observed that aspect ratio plays an important role in determining failure mechanisms not only in the infill but also in the frame.
کلیدواژه ها:
نویسندگان
M.R Noorfard
M.Sc Student, School of Civil Eng., University College of Eng., University of Tehran
M. S. Marefat
Professor, School of Civil Eng., University College of Engineering, University of Tehran
مراجع و منابع این مقاله:
لیست زیر مراجع و منابع استفاده شده در این مقاله را نمایش می دهد. این مراجع به صورت کاملا ماشینی و بر اساس هوش مصنوعی استخراج شده اند و لذا ممکن است دارای اشکالاتی باشند که به مرور زمان دقت استخراج این محتوا افزایش می یابد. مراجعی که مقالات مربوط به آنها در سیویلیکا نمایه شده و پیدا شده اند، به خود مقاله لینک شده اند :